Bitumen ( , ) is an immensely viscous constituent of petroleum. Depending on its exact composition, it can be a sticky, black liquid or an apparently solid mass that behaves as a liquid over very large time scales. In American English, the material is commonly referred to as asphalt. Whether found in natural deposits or refined from petroleum, the substance is classed as a pitch. Prior to the 20th century, the term asphaltum was in general use. The word derives from the Ancient Greek word (), which referred to natural bitumen or pitch. The largest natural deposit of bitumen in the world is the Pitch Lake of southwest Trinidad, which is estimated to contain 10 million tons.
About 70% of annual bitumen production is destined for road construction, its primary use. In this application, bitumen is used to bind aggregate particles, like gravel, and forms a substance referred to as asphalt concrete, which is colloquially termed asphalt. Its other main uses lie in bituminous waterproofing products, such as roofing felt and roof sealant.
In materials science and engineering, the terms asphalt and bitumen are often used interchangeably and refer to both natural and manufactured forms of the substance, although there is regional variation as to which term is most common. Worldwide, geologists tend to favor the term bitumen for the naturally occurring material. For the manufactured material, which is a refined residue from the distillation process of selected crude oils, bitumen is the prevalent term in much of the world; however, in American English, asphalt is more commonly used. To help avoid confusion, the terms "liquid asphalt", "asphalt binder", or "asphalt cement" are used in the U.S. to distinguish it from asphalt concrete. Colloquially, various forms of bitumen are sometimes referred to as tar, as in La Brea Tar Pits, although tar is not the same thing as bitumen.
Naturally occurring bitumen is sometimes specified by the term crude bitumen. Its viscosity is similar to that of cold molasses while the material obtained from the fractional distillation of crude oil boiling at is sometimes referred to as refined bitumen. The Canadian province of Alberta has most of the world's reserves of natural bitumen in the Athabasca oil sands, which cover , an area larger than England.
Terminology Etymology The Latin word traces to the Proto-Indo-European root "pitch".
The word "asphalt" is derived from the late Middle English, in turn from French , based on Late Latin , which is the latinisation of the Greek (), a word meaning "asphalt/bitumen/pitch",. which perhaps derives from , "not, without", i.e. the alpha privative, and (), "to cause to fall, baffle, (in passive) err, (in passive) be balked of"..
The first use of asphalt by the ancients was as a cement to secure or join various objects, and it thus seems likely that the name itself was expressive of this application. Specifically, Herodotus mentioned that bitumen was brought to Babylon to build its gigantic fortification wall.Herodotus, The Histories, 1.179.4, on Perseus.
In French, the term is used for naturally occurring asphalt-soaked limestone deposits, and for specialised manufactured products with fewer voids or greater bitumen content than the "asphaltic concrete" used to pave roads.
Modern terminology Bitumen mixed with clay was usually called "asphaltum", but the term is less commonly used today.
In American English, "asphalt" is equivalent to the British "bitumen". However, "asphalt" is also commonly used as a shortened form of "asphalt concrete" (therefore equivalent to the British "asphalt" or "tarmac").
In Canadian English, the word "bitumen" is used to refer to the vast Canadian deposits of extremely heavy crude oil, while "asphalt" is used for the oil refinery product. Diluted bitumen (diluted with naphtha to make it flow in pipelines) is known as "dilbit" in the Canadian petroleum industry, while bitumen "upgraded" to synthetic crude oil is known as "syncrude", and syncrude blended with bitumen is called "synbit".
"Bitumen" is still the preferred geological term for naturally occurring deposits of the solid or semi-solid form of petroleum. "Bituminous rock" is a form of sandstone impregnated with bitumen. The oil sands of Alberta, Canada are a similar material.
Neither of the terms "asphalt" or "bitumen" should be confused with tar or coal tars. Tar is the thick liquid product of the dry distillation and pyrolysis of organic hydrocarbons primarily sourced from vegetation masses, whether fossilized as with coal, or freshly harvested. The majority of bitumen, on the other hand, was formed naturally when vast quantities of organic animal materials were deposited by water and buried hundreds of metres deep at the diagenetic point, where the disorganized fatty hydrocarbon molecules joined in long chains in the absence of oxygen. Bitumen occurs as a solid or highly viscous liquid. It may even be mixed in with coal deposits. Bitumen, and coal using the Bergius process, can be refined into petrols such as gasoline, and bitumen may be distilled into tar, not the other way around.
Composition
Normal composition The components of bitumen include four main classes of compounds: Naphthene aromatics (naphthalene), consisting of partially hydrogenated polycyclic aromatic compounds Polar aromatics, consisting of high molecular weight phenols and carboxylic acids produced by partial oxidation of the material Saturated hydrocarbons; the percentage of saturated compounds in asphalt correlates with its softening point Asphaltenes, consisting of high molecular weight phenols and heterocyclic compounds
Bitumen typically contains, elementally 80% by weight of carbon; 10% hydrogen; up to 6% sulfur; and molecularly, between 5 and 25% by weight of asphaltenes dispersed in 90% to 65% maltenes. Most natural bitumens also contain organosulfur compounds, nickel and vanadium are found at <10 parts per million, as is typical of some petroleum. The substance is soluble in carbon disulfide. It is commonly modelled as a colloid, with asphaltenes as the dispersed phase and maltenes as the continuous phase. "It is almost impossible to separate and identify all the different molecules of bitumen, because the number of molecules with different chemical structure is extremely large".Muhammad Abdul Quddus (1992), p. 99, in ch. 5 pdf
Asphalt may be confused with coal tar, which is a visually similar black, thermoplastic material produced by the destructive distillation of coal. During the early and mid-20th century, when town gas was produced, coal tar was a readily available byproduct and extensively used as the binder for road aggregates. The addition of coal tar to macadam roads led to the word "tarmac", which is now used in common parlance to refer to road-making materials. However, since the 1970s, when natural gas succeeded town gas, bitumen has completely overtaken the use of coal tar in these applications. Other examples of this confusion include La Brea Tar Pits and the Canadian tar sands, both of which actually contain natural bitumen rather than tar. "Pitch" is another term sometimes informally used at times to refer to asphalt, as in Pitch Lake.
Additives, mixtures and contaminants For economic and other reasons, bitumen is sometimes sold combined with other materials, often without being labeled as anything other than simply "bitumen".Arnold, Terence S. (senior research chemist, Pavement Materials Team, Office of Infrastructure Research and Development, Federal Highway Administration; Federal lab manager for the chemistry lab, Turner-Fairbank Highway Research Center; fellow of the Royal Society of Chemistry in the United Kingdom), "What's in Your Asphalt?," September 2017 (last modified 25 October 2017), Public Roads, FHWA-HRT-17-006.htm," Office of Research, Development, and Technology, Office of Corporate Research, Technology, and Innovation Management, Federal Highway Administration, U.S. Department of Transportation
Of particular note is the use of re-refined engine oil bottoms – "REOB" or "REOBs"the residue of recycled automotive engine oil collected from the bottoms of re-refining vacuum distillation towers, in the manufacture of asphalt. REOB contains various elements and compounds found in recycled engine oil: additives to the original oil and materials accumulating from its circulation in the engine (typically iron and copper). Some research has indicated a correlation between this adulteration of bitumen and poorer-performing pavement.
Occurrence
The majority of bitumen used commercially is obtained from petroleum. Nonetheless, large amounts of bitumen occur in concentrated form in nature. Naturally occurring deposits of bitumen are formed from the remains of ancient, microscopic algae (diatoms) and other once-living things. These natural deposits of bitumen have been formed during the Carboniferous period, when giant swamp forests dominated many parts of the Earth. They were deposited in the mud on the bottom of the ocean or lake where the organisms lived. Under the heat (above 50°C) and pressure of burial deep in the earth, the remains were transformed into materials such as bitumen, kerogen, or petroleum.
Natural deposits of bitumen include lakes such as the Pitch Lake in Trinidad and Tobago and Lake Bermudez in Venezuela. Natural seeps occur in the La Brea Tar Pits and the McKittrick Tar Pits in California, as well as in the Dead Sea.
Bitumen also occurs in unconsolidated sandstones known as "oil sands" in Alberta, Canada, and the similar "tar sands" in Utah, US. The Canadian province of Alberta has most of the world's reserves, in three huge deposits covering , an area larger than England or New York state. These bituminous sands contain of commercially established oil reserves, giving Canada the third largest oil reserves in the world. Although historically it was used without refining to pave roads, nearly all of the output is now used as raw material for oil refineries in Canada and the United States.
The world's largest deposit of natural bitumen, known as the Athabasca oil sands, is located in the McMurray Formation of Northern Alberta. This formation is from the early Cretaceous, and is composed of numerous lenses of oil-bearing sand with up to 20% oil. Isotopic studies show the oil deposits to be about 110 million years old. Two smaller but still very large formations occur in the Peace River oil sands and the Cold Lake oil sands, to the west and southeast of the Athabasca oil sands, respectively. Of the Alberta deposits, only parts of the Athabasca oil sands are shallow enough to be suitable for surface mining. The other 80% has to be produced by oil wells using enhanced oil recovery techniques like steam-assisted gravity drainage.
Much smaller heavy oil or bitumen deposits also occur in the Uinta Basin in Utah, US. The Tar Sand Triangle deposit, for example, is roughly 6% bitumen.
Bitumen may occur in hydrothermal veins. An example of this is within the Uinta Basin of Utah, in the US, where there is a swarm of laterally and vertically extensive veins composed of a solid hydrocarbon termed Gilsonite. These veins formed by the polymerization and solidification of hydrocarbons that were mobilized from the deeper oil shales of the Green River Formation during burial and diagenesis.